• Vacuum and Pressure on the same meter or controller

     This line of P Series Digital Pressure Gauges are a series of indicating transmitters that digitally display pressure, and offer a variety of output options. The standard outputs include analog 0-5Vdc, or 0-10Vdc, or RS-232 digital communication. A 4-20mA current output is optional. The P Series can be scaled in ranges from vacuum to 1000 PSI in gas or liquid. They can also be configured with an optional battery pack, which converts your pressure gauge into a high precision calibration device. The PC Series Digital Pressure Controllers are for low-pressure applications ranging from vacuum to 1.0PSIA full scale to 100PSIG full scale. The PCs accept a selectable analog or digital control set point command from either external devices or Local Set Point Module (LSPM). The controllers offer an electronic output signal independent of the set point input that indicates the actual line pressure. Standard inputs include 0-5Vdc, 0-10Vdc or RS-232 with optional 4-20mA. As a transmitter, the same analog and digital signal options are also available. The dynamic digital display and push button interface, available on both the P and PC Series, allows for easy operator interface of the various meter functions and display options.

Why Choose These Pressure Gauges & Controllers?

Design Features

• Ranges from vacuum to 100PSI

• Response time of 5milliseconds typical /adjustable (meter)

• Turndown Ratio of 100:1

• Position Insensitive

• Push Button Tare

• Accuracy of +/-0.5% full scale with optional +/-0.25% full scale

Options

• Ranges from vacuum to 100PSI

• Response time of 5milliseconds typical /adjustable (meter)

• Turndown Ratio of 100:1

• Position Insensitive

• Push Button Tare

• Accuracy of +/-0.5% full scale with optional +/-0.25% full scale

Applications

• Medical

• Environmental

• Industrial

• Process Control

• Laboratory

• Leak Testing

• Mechanical Gauge Replacement

• CMP Tools