These precision borosilicate glass flowmeters have
interchangeable tube assemblies and include
a built-in rotating magnifying strip and 180º viewing
angle for easy reading.
Two different tube lengths, 65 mm and 150 mm, are available
in 18 different air and water flow ranges.
Any model may be fitted with one or two floats to
increase the operating range.
Single float flowmeters have 10:1 turndown ratios, and dual
float flowmeters have 20:1 turndown ratio.
The GS series has been designed to maintain maximum pressures
to 200 PSI and temperatures to 200 ºF.
These flowmeters are fitted with 1/8"
FNPT inlet and outlet connections spaced 4 1/2" or 8 13/16" apart.
An optional standard cartridge or precision control valve is available.
SPECIFICATIONS:
Accuracy
65mm - ± 5%
Full Scale 150mm - ± 3% Full Scale
Back Plate
Extruded
Aluminum
Tube
Borosilicate
Glass
Floats
Black Glass
Sapphire Stainless Steel Carboloy Tantalum
Temperature
200 ºF / 93 ºC
Maximum
Pressure
200 PSI Maximum
End Blocks
Aluminum
Brass Stainless Steel
Fittings/Seals
Brass
Stainless Steel
Inlet Valve
None
Standard Cartridge Precision
Seal
Material
BUNA-N Viton
Special
Custom options include direct reading scales instead of mm scales or
even manifolded construction. Calibrated flow curves are included with
standard mm scale flowmeters.
These precision borosilicate glass flowmeters have
interchangeable tube assemblies and include
a built-in rotating magnifying strip and 180º viewing
angle for easy reading.
Two different tube lengths, 65 mm and 150 mm, are available
in 18 different air and water flow ranges.
Any model may be fitted with one or two floats to
increase the operating range.
Single float flowmeters have 10:1 turndown ratios, and dual
float flowmeters have 20:1 turndown ratio.
The GS series has been designed to maintain maximum pressures
to 200 PSI and temperatures to 200 ºF.